Database Lookup:        
          
            By Part Number
             By Description
               
           
       
     
    
      
        Total 48169 part numbers listed in this database.  Shown in 1506 pages by 32 items.     
   
  Pages:    Prev ,   Next ,   416   417   418   419   420   421   422   423   424   425   426   427   428   429   430   431   432   433   434   435   436  
  
    Part Number 
    Product Category 
    Description 
    Image 
    Stock Qty 
    Weight (lbs.) 
    Price (US$) 
    Order Quantity 
   
  AME-E004175 
  Ametek Parts 
  Ametek Gemco Bushing  Part  E004175  aka  E004175006  Neoprene Shock Bushing  For CB-15 & CB-35 Brakes  Used with Pin E004055 & E005028 at Top of Link  2 per brake, not shown on the parts list  Ships from Stock to 10 Days  Dated 01-2023  (1LB)  H  4"  L  5"  W  4"  Box 
  - 
  9 
  0.00 
  8.64 
  
 
 
  AME-E004182 
  Ametek Parts 
  Ametek Gemco Coil  Part  E004182  Series Wound Coil  For a 4.5 Inch TM-43 DC Brake  0.936 OHM Resistance  14 AMPS / 1/2 Hour  11.5 AMPS /  1 Hour  aka 208C757G16  Ships in 5 weeks, Peck MI  Dated 7/18 
  - 
  0 
  0.00 
  1,572.48 
  
 
 
  AME-E004500 
  Ametek Parts 
  Ametek Gemco Brake Wheel 4.5 Inch  Part  E004500  aka E004500999  For the TM-43 DC Brake Assembly  With the Offset Style Hub  4.50 Inch Wheel Diameter  3.13 Inch Face Width  2.62 Inch Hub Offset  2.00 Inch Hub Length Through Bore  2.75 Inch Hub Diameter  Solid Hub with Bore Center Drilled   1.625 Inch Maximum Recommended Bore  9850 Maximum RPM  Cast from ASTM A 536 Ductile Iron  80-60-03 or 80-55-06  Normally a Stock Item @ BPI  Ships from Stock to 4 Weeks  Dated  01-2025  (6LBS)  H  5"  L  5"  W  5"  Box 
  - 
  3 
  0.00 
  1,501.00 
  
 
 
  AME-E004517 
  Ametek Parts 
  Ametek Gemco Brake Wheel 4.5 Inch  For the TM-43 DC Brake Assembly  With a Finished Offset Style Hub  4.50 Inch Wheel Diameter  3.13 Inch Face Width  2.62 Inch Hub Offset  2.00 Inch Hub Length Through Bore  2.75 Inch Hub Diameter  0.75 Inch Bore Diameter, Straight  0.748 / 0.0749 Bore Tolerance  3/16 X 3/32 Inch Keyway  9850 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Part  AME-E004517  (6LBS)    H  5"    L  5"   W  5"   Box  [Amazon] 
  - 
  0 
  0.00 
  1,284.01 
  
 
 
  AME-E004600 
  Ametek Parts 
  Ametek Gemco Brake Wheel 4.5 Inch 
  - 
  0 
  0.00 
  1,234.44 
  
 
 
  AME-E004800 
  Ametek Parts 
  Ametek Gemco Brake Wheel 4.5 Inch  Part  E004800  Old Part aka  2247C13H01  For the CB-15 AC Brake Assembly  4.50 Inch Brake Wheel Diameter, Stock Bore  2.75 Inch Face Width  2.64 Inch Hub Offset, when measured from centerline of face  2.20 Inch Hub Length Through Bore  2.75 Inch Hub Diameter  Solid Hub with Bore Center Drilled   1.625 Inch Maximum Recommended Bore  9850 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated  10-2021  (6LBS)  H  5"  L  5"  W  5" Box 
  - 
  4 
  0.00 
  1,272.24 
  
 
 
  AME-E005000 
  Ametek Parts 
  Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  115 Volt  AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70" 
  - 
  0 
  0.00 
  1,209.60 
  
 
 
  AME-E005001 
  Ametek Parts 
  Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  230 Volt  AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70" 
  - 
  0 
  0.00 
  1,209.60 
  
 
 
  AME-E005002 
  Ametek Parts 
  Ametek Gemco CB-35 Solenoid Brake  Part E005002  Magnetic Shoe Brake Assembly  Spring Set - Solenoid Released  5.50 Inch Diameter  460 Volt  AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel Part E005500  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid - tested in more than 2 million cycles  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  Simple two-point adjustment for lining wear  Normally a Stock Item @ BPI  Ships from Stock to 5 Weeks  Dated   01-2021  (34LBS) H 10" L 16" W 8" Box 
  - 
  0 
  0.00 
  1,323.00 
  
 
 
  AME-E005003 
  Ametek Parts 
  Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  575 Volt  AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70" 
  - 
  0 
  0.00 
  1,209.60 
  
 
 
  AME-E005004 
  Ametek Parts 
  Ametek Gemco Brake  Magnetic Shoe Brake Assembly  Spring Set / Solenoid Released  5.50 Inch Diameter  200 Volt  AC 60 Hz., Single Phase  35 FT LB with a Intermittent Duty Cycle  25 FT LB with a Continues Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts. Simple one point torque adjustment. Rugged long life solenoid - tested in more than 2 million operational cycles without electrical failure. Manual brake release with hand pressure on the solenoid arm. Solenoid plunger travel indicator - a mark on the plunger indicates when the brake should be adjusted for lining wear. Simple two-point adjustment for lining wear  Dated 7/18  (34LBS) H 9.43" L 14.13" W 5.70" 
  - 
  0 
  0.00 
  1,209.60 
  
 
 
  AME-E005025 
  Ametek Parts 
  Ametek Gemco Nameplate on a CB Brake 
  - 
  0 
  0.00 
  Call 
  N/A 
 
  AME-E005027 
  Ametek Parts 
  Ametek Gemco Pin  Part  E005027  For a 5.5 Inch CB-35 AC Brake  Item 14,  3 per brake  Located at the Top & Bottom of the Brake Shoes  aka 2247C08H04  Dated  01-2024  (1LB)   H  4"    L  5"   W  4" Box 
  - 
  5 
  0.00 
  79.00 
  
 
 
  AME-E005028 
  Ametek Parts 
  Ametek Gemco Pin  Part   E005028  aka E005028006  For a CB-35  5 & 1/2 Inch Brake Assembly  Pin connection between Vertical Link and Lever Arm  Item 7,   1 per brake  1.75 Inches Long  Old WEST 3279B92H02  Normally a Stock Item @ BPI  Ships from Stock to 10 Days  Dated  01-2024  (1LB)   H  4"  L  5"  W  4" Box 
  - 
  0 
  0.00 
  54.00 
  
 
 
  AME-E005029 
  Ametek Parts 
  Ametek Gemco Pin  Part  E005029  aka  E005029006  For a CB-35 Brake Assembly  Connects Plunger to Link  1 & 3/8 Inches Long  Item 6, 1 per brake  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated  01-2024 
  - 
  1 
  0.00 
  53.00 
  
 
 
  AME-E005031 
  Ametek Parts 
  Ametek Gemco Pin  Part  E005031  For a CB-35 Brake  Item 15,  1 per brake  aka  2247C08H16  Dated  01-2024  (1LB)   H  4"    L  5"   W  4"  Box 
  - 
  3 
  0.00 
  51.00 
  
 
 
  AME-E005032 
  Ametek Parts 
  Ametek Gemco Lever Arm  Part  E005032  For a CB35   5 & 1/2 Inch Brake Assembly  Lever between Plunger Link and Inner Shoe Arm  aka  Westinghouse 2247C09H02  Dated  01-2024  (1LB)   H  4"    L  5"   W  4"  Box 
  - 
  0 
  0.00 
  173.00 
  
 
 
  AME-E005033 
  Ametek Parts 
  Ametek Gemco Rod  Part  E005033  Adjusting Rod  For a 5.5 Inch CB-35 Brake  Item 17, 1 per brake  aka 3279B86G02  Dated  01-2024  (2LBS)   H  4"    L  7"   W  4"  Box 
  - 
  0 
  0.00 
  376.00 
  
 
 
  AME-E005034 
  Ametek Parts 
  Ametek Gemco Spring Plate  Part  E005034  For a 5.5 Inch CB-35 AC Brake  aka 3280B89H02  Dated  01-2024  (1LB)   H  4"    L  5"   W  4"  Box 
  - 
  1 
  0.00 
  199.00 
  
 
 
  AME-E005035 
  Ametek Parts 
  Ametek Gemco Link  Part    E005035  aka  E005035006  For a CB35 Brake  Link between Plunger & Lever Arm  Item Ref  7   1 per brake  aka 3279B92H02  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated  01-2024  (1LBS)  H  4"  L  5"  W  4"  Box 
  - 
  4 
  0.00 
  70.00 
  
 
 
  AME-E005036 
  Ametek Parts 
  Ametek Gemco Spring Seat  Part  E005036  Spring Seat on the Tie Rod  For a CB-35 Brake  Item 10, 1 per brake  aka 3279B94H01  Dated  01-2024  (1LB)   H  4"  L  5"  W  4"  Box 
  - 
  1 
  0.00 
  7.00 
  
 
 
  AME-E005037 
  Ametek Parts 
  Ametek Gemco Lining Kit  Part  E005037  For a 5.5 Inch CB-35 Brake   2 Un Drilled Linings   Premium OEM Non-Asbestos Lining Material  C.F. for Pricing  Dated  01-2024  C.F.        (90.00)  (1LB)   H  4"    L 6"   W  4"  Box 
  - 
  0 
  0.00 
  Call 
  N/A 
 
  AME-E005038 
  Ametek Parts 
  Ametek Gemco Spring  Part  E005038  Main Tension Spring  For a CB-35 / 5.5 Inch Brake  Item 11,  1 per brake  aka 3280B02H02  Dated  01-2024  (1LB)   H  4"    L 5"   W  4"  Box 
  - 
  4 
  0.00 
  65.00 
  
 
 
  AME-E005039 
  Ametek Parts 
  Ametek Gemco Brake Coil CB 5.5 460 V  Part  E005039  aka E005039999  Old Part 3208B04G07   460 Volt AC 60 Hz  For a 5.5 Inch CB-35 Brake  Item 2, 1 per brake  Normally a stock item @ BPI  Ships from Stock to 3 Weeks  Dated  07-2025  (1LB)  H  4"  L  6"  W  4"  Box 
  - 
  0 
  0.00 
  427.00 
  
 
 
  AME-E005040 
  Ametek Parts 
  Ametek Gemco Shoe Link  Part  E005040  Dated  01-2024  (2LBS)   H  4"    L 6"   W  4"  Box 
  - 
  0 
  0.00 
  306.00 
  
 
 
  AME-E005042 
  Ametek Parts 
  Ametek Gemco Base  Part  E005042  Brake Frame / Base  For a CB-35 Solenoid Brake  Item  1, 1 per brake  C.F. for Pricing  Dated  01-2024  (2LBS)   H  4"    L  8"   W  4"  Box 
  - 
  0 
  0.00 
  Call 
  N/A 
 
  AME-E005044 
  Ametek Parts 
  Ametek Gemco Condulet - Junction Box  Part  E005044  aka  E005044999  For a CB-15 or CB-35 Solenoid Brake  Item 3, 1 per brake  Does NOT include the Cover Part E005095  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated  01-2024  (1LB)   H  4"   L  5"  W  4"  Box 
  - 
  0 
  0.00 
  78.00 
  
 
 
  AME-E005046 
  Ametek Parts 
  Ametek Gemco Brake Part  Spring  Part  E005046  aka old 3284B67H02  Dated  01-2024  OBSELETE 
  - 
  0 
  0.00 
  Call 
  N/A 
 
  AME-E005047 
  Ametek Parts 
  Ametek Gemco Brake Shoe & Lining CB35 5.5  Part  E005047  aka  E005047004  Old Part 2254C27G02  For a CB35 Brake Assembly  Outer Shoe,  away from the solenoid  Bonded, Premium, Non-Asbestos Lining Material  Normally a Stock Item @ BPI   Ships from Stock to 3 Weeks  Dated  01-2024  (5LBS)  H  5"  L  10" W  5"  Box 
  - 
  4 
  0.00 
  558.00 
  
 
 
  AME-E005048 
  Ametek Parts 
  Ametek Gemco Brake Shoe & Lining CB 5.5"  Part  E005048  aka  E005048004  Old Part 247C28G02  For a CB35 Brake Assembly  Inner Shoe, close to solenoid  Bonded, Premium Non-Asbestos Lining Material  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated  01-2024  (5LBS)  H  5" L  10"  W  5"  Box 
  - 
  5 
  0.00 
  558.00 
  
 
 
  AME-E005049 
  Ametek Parts 
  Ametek Gemco Lining Kit  Part  E005049  For a 5.5 Inch CB-35 Brake   2 Drilled Linings & Push Pins  Premium OEM Non-Asbestos Lining Material  aka 3279B95G02  C.F. for Pricing  Dated  01-2024  (2LBS)   H  4"    L 6"   W  4"  Box 
  - 
  0 
  0.00 
  Call 
  N/A 
 
  AME-E005050 
  Ametek Parts 
  Ametek Gemco Solenoid Guide  Part    E005050  aka   E005050999  Old Part  6753A37H02  For a CB-15 or CB-35 Brake Assembly  Brass Fabrication not Plastic  Item 5, 2 per brake, but sold each  Normally a Stock item @ BPI  Ships from Stock to 2 Weeks  Dated  01-2024  (1LB)  H  4"  L  5"  W  4"  Box 
  - 
  2 
  0.00 
  46.00