Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
2,513 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,107 part numbers: Motion Control Products
 
  GLEASON
23,193 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,719 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,283 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,499 part numbers: Motor Mounted Brakes
  HUBBELL
16,189 part numbers: Electrical Control Products
  SUPERBOLT
118 part numbers: Fastening Solutions
  TELEMOTIVE
2,419 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
732 part numbers
 

Gemco Direct
Amazon Store

 
5,981 part numbers
 

Gleason Direct
Amazon Store

 
1,033 part numbers
 

Telemotive Direct
Amazon Store

 
19 part numbers
 
Web: www.gleasondirect.com Email: sales@gleasondirect.com Phone: (888) 861-8777
 
 
Cable Management: Pre-Engineered Products: Hose Reels
Gleason Industrial Hose Reels
 
Gleason Industrial Hose Reels   Hose Reels with 1/4" to 1/2" I.D. PVC hose. Ideal mounted under workbench. May also be hung from wall or ceiling. Full flow shaft and swivel assure maximum product flow. Reels feature spring rewind with ratchet lock and multiple position hose guide. Rugged steel construction with durable baked polyester finish. Adjustable hose stop included.
 
Gleason Industrial Hose Reels Information
 
Gleason E-Z Pull Single Hose Reels
 
Gleason E-Z Pull Single Hose Reels   E-Z PULL HOSE REELS are designed to make hose handling safer and smoother and to minimize costly hose replacement caused by excessive rewind speeds. Rewind pull is kept to a minimum. The result is a reel that is gentle to pull out, yet very adequate to rewind the hose. In some situations, the rewind pull provided by E-Z PULL reels may require a gentle assist from the operator.
 
The E-Z PULL reel was designed to drag the hose across the floor, but will not lift the hose weight vertically. Therefore, the reel should be mounted a maximum of 3 ft (0.9m) above the floor so that the hose may be pulled horizontally. Reel may be mounted with base up, down, or on a wall. A typical mounting is under a workbench or other floor mounted equipment. This reel is not designed to be mounted on a machine requiring automatic hose rewind.
 
Gleason E-Z Pull Single Hose Reels Information
 
Gleason Series HH Hose Reels
 
Gleason Series HH Hose Reels   Choose reels designed for 1/2", 3/4" or 1" hose. Standard reels are supplied with EPR seals in the swivel joint, specify application when ordering if standard EPR is not acceptable. Hose is not included with reel, therefore the hose must be purchased separately and matched to reel for your specific application. Full flow shaft and swivel assure maximum product delivery. Input fitting on the swivel joint is the same size as the output fitting on the reel spool.
 
Gleason Series HH Hose Reels Information
Gleason Heavy Duty Single Hose Reels
 
Gleason Heavy Duty Single Hose Reels   Ideal for connecting machines to air/water supply. Also designed for hand pull operations, with or without ratchet stop.
 
Features:
  • 1/4", 3/8", or 1/2" (6, 9, 13mm) hose
  • All welded solid steel construction
  • Fully automatic; Machine mountable
  • Heavy duty mounting bracket
  • Safetychange® spring motor
  • Weatherproof gasket on spring motor
  • Positive ratchet lock with disengage
  • Multi-position adjustable hose guide
  • Orange polyester baked-on finish
  • Also available without hose
  • Optional 340 degree pivot base
  • Optional adjustable hose stop
  • Ideal for fluids, compressed air
  • Mount base up, down or to wall for
    vertical or horizontal hose travel.
 
Gleason Heavy Duty Single Hose Reels Information
 
Gleason Clean Air Hose Reels
 
Gleason Clean Air Hose Reels   E-Z PULL CLEAN AIR HOSE REELS are engineered to safely and efficiently store the hose from an air line respirator. Gone are loose coils that cause tangled hoses which can lead to dangerous kinks in the air line. User is in complete control. Soft rewind pull means that even if ratchet stop should accidentally be released, hose will not snap back. Reel designed for 50 ft.(15m) x 7/8"(22mm) O.D. Neoprene hose supplied by others (GSA part number 455022 or equivalent). All air path parts are stainless steel.
 
Gleason Clean Air Hose Reels Information
 
Gleason Series UH Hose Reels
 
Gleason Series UH Hose Reels   The Gleason U-Reel provides ultimate flexibility... larger diameter and/or wider spools, single or dual spring motors, chain drive where needed. In addition, the modular U-Reel design allows us to provide a custom reel for your application at the cost of an off-the-shelf unit. Sizing tables in this catalog enable you to choose your reel from a selection of commonly used sizes. Or, send us your requirements and let the sophisticated Gleason computerized program determine the spool size, spring configuration and drive that will give you the most rugged, smoothest operating and longest lasting reel money can buy. The rugged U-Reel, featuring a heavy frame with spool supported on dual over-sized bearings, can easily handle air, water or hydraulic hoses up to 1.5" I.D. U-Reel is rated at 300 psi per standard hose and hose fittings but high pressure applications to 10,000 p.s.i. are possible with proper hardware. Options include an adjustable roller hose guide, spool lock, ratchet lock, 340o pivot base, dual hose and stainless steel fluid path.
 
Gleason Series UH Hose Reels Information
Gleason E-Z Pull Hose Reels
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 GRD-EZ4-2525 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 25 Feet of 1/4 Inch I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
1/4 Inch NPTF Entrance 
(30LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $785.46
2 GRD-EZ4-2535 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 35 Feet of 1/4 Inch I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
1/4 Inch NPTF Entrance 
(30LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $806.16
3 GRD-EZ9-2550 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 50 Feet of 1/4 Inch I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
3/8 Inch NPTF Entrance 
(42LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $1,128.43
4 GRD-EZ4-3825 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 25 Feet of 3/8 Inch I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
3/8 Inch NPTF Entrance 
(30LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $795.67
5 GRD-EZ4-3835 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 35 Feet of 3/8 Inch I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
3/8 Inch NPTF Entrance 
(30LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $821.44
6 GRD-EZ9-3850 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 50 Feet of 3/8 Inch I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
3/8 Inch NPTF Entrance 
aka 602329 
(60LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $1,147.96
7 GRD-EZ9-5025 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 25 Feet of 1/2 I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
1/2 Inch NPTF Entrance 
(62LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $1,112.08
8 GRD-EZ9-5035 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 35 Feet of 1/2 I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
1/2 Inch NPTF Entrance 
(62LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $1,147.21
9 GRD-EZ9-5050 Gleason Hose Reel Heavy Duty 
Series E-Z Gentle Pull Hose Reels 
Handles 25 Feet of 1/2 I.D. Hose 
Includes Fittings, CP-3 Hose Stop Guide Arm, 4 Roller Guide and a Ratchet Lock that can be dis-engaged for continues tension 
All Welded Steel Contruction 
Orange Polyester Baked on Powder Coat Finish 
EZ-Pull Main Spring for Hand Pull / Manual Applications 
Maximum Pressure 315PSI 
1/2 Inch NPTF Entrance 
aka 602329 
(62LBS) H 10.00" L 20.00" W 12.00" 
[Amazon]
0 $1,199.90
Gleason Series H Heavy Duty Hose Reels
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 GRD-HC2525 Gleason Model HC2525 Series H Heavy Duty Hose Reel for Machine Pull, P/N: GRD-HC2525 
Features: 
- 1/4", 3/8", or 1/2" (6, 9, 13mm) hose; 
- All welded solid steel construction; 
- Fully automatic, Machine mountable; 
- Heavy duty mounting bracket; 
- Safetychange spring motor; 
- Weatherproof gasket on spring motor; 
- Positive ratchet lock with disengage; 
- Multi-position adjustable hose guide; 
- Orange polyester baked-on finish; 
- Adjustable hose stop included; 
Specifications: 
- Inside diameter: 1/4 in. (6mm); 
- Input & output fittings: 0.25 NPTF; 
- Max length: 25 ft. (7.5m); 
- Max pressure: 315 psi (2.17 N/mm2); 
- Reel size: A; 
- Optional 340 degree pivot base, P/N PB14; 
(35LBS) H 8" L 18" W 16" 
[Amazon]
0 $765.91
2 GRD-HC2535 Gleason Model HC2535 Series H Heavy Duty Hose Reel for Machine Pull, P/N: GRD-HC2535 
Features: 
- 1/4", 3/8", or 1/2" (6, 9, 13mm) hose; 
- All welded solid steel construction; 
- Fully automatic, Machine mountable; 
- Heavy duty mounting bracket; 
- Safetychange spring motor; 
- Weatherproof gasket on spring motor; 
- Positive ratchet lock with disengage; 
- Multi-position adjustable hose guide; 
- Orange polyester baked-on finish; 
- Adjustable hose stop included; 
Specifications: 
- Inside diameter: 1/4 in. (6mm); 
- Input & output fittings: 0.25 NPTF; 
- Max length: 35 ft. (10.5m); 
- Max pressure: 315 psi (2.17 N/mm2); 
- Reel size: A; 
- Optional 340 degree pivot base, P/N PB14; 
(40LBS) H 8" L 18" W 16" 
[Amazon]
0 $787.48
3 GRD-HE2550 Gleason Model HE2550 Series H Heavy Duty Hose Reel for Machine Pull, P/N: GRD-HE2550 
Features: 
- 1/4", 3/8", or 1/2" (6, 9, 13mm) hose; 
- All welded solid steel construction; 
- Fully automatic, Machine mountable; 
- Heavy duty mounting bracket; 
- Safetychange spring motor; 
- Weatherproof gasket on spring motor; 
- Positive ratchet lock with disengage; 
- Multi-position adjustable hose guide; 
- Orange polyester baked-on finish; 
- Adjustable hose stop included; 
Specifications: 
- Inside diameter: 1/4 in. (6mm); 
- Input & output fittings: 0.25 NPTF; 
- Max length: 50 ft. (15.0m); 
- Max pressure: 315 psi (2.17 N/mm2); 
- Reel size: A; 
- Optional 340 degree pivot base, P/N PB14; 
(45LBS) H 8" L 18" W 16" 
[Amazon]
0 $863.61
4 GRD-HC3825 Gleason Model HC3825 Series H Heavy Duty Hose Reel for Machine Pull, P/N: GRD-HC3825 
Features: 
- 1/4", 3/8", or 1/2" (6, 9, 13mm) hose; 
- All welded solid steel construction; 
- Fully automatic, Machine mountable; 
- Heavy duty mounting bracket; 
- Safetychange spring motor; 
- Weatherproof gasket on spring motor; 
- Positive ratchet lock with disengage; 
- Multi-position adjustable hose guide; 
- Orange polyester baked-on finish; 
- Adjustable hose stop included; 
Specifications: 
- Inside diameter: 3/8 in. (9mm); 
- Input & output fittings: 0.38 NPTF; 
- Max length: 25 ft. (7.5m); 
- Max pressure: 315 psi (2.17 N/mm2); 
- Reel size: A; 
- Optional 340 degree pivot base, P/N PB14; 
(30LBS) H 8" L 18" W 16" 
[Amazon]
0 $774.51
5 GRD-HD3835 Gleason Model HD3835 Series H Heavy Duty Hose Reel for Machine Pull, P/N: GRD-HD3835 
Features: 
- 1/4", 3/8", or 1/2" (6, 9, 13mm) hose; 
- All welded solid steel construction; 
- Fully automatic, Machine mountable; 
- Heavy duty mounting bracket; 
- Safetychange spring motor; 
- Weatherproof gasket on spring motor; 
- Positive ratchet lock with disengage; 
- Multi-position adjustable hose guide; 
- Orange polyester baked-on finish; 
- Adjustable hose stop included; 
Specifications: 
- Inside diameter: 3/8 in. (9mm); 
- Input & output fittings: 0.38 NPTF; 
- Max length: 35 ft. (10.5m); 
- Max pressure: 315 psi (2.17 N/mm2); 
- Reel size: A; 
- Optional 340 degree pivot base, P/N PB14; 
(35LBS) H 8" L 18" W 16" 
[Amazon]
0 $822.68
6 GRD-HF3850 Gleason Hose Reel 
Heavy Duty Hose Reel 
Series H for Machine Pull 
Part GRD-HF3850 
Features: 
- 3/8 Inch / 9mm Hose ID 
- All Welded Solid Steel Construction 
- Fully Automatic, Machine Mountable 
- Heavy Duty Mounting Bracket 
- Safetychange Spring Motor 
- Weatherproof Gasket on Spring Motor 
- Positive Ratchet Lock that can be disengage for constant tension 
- Multi-Position Adjustable Hose Guide 
- Orange Polyester Baked-on Finish 
- Adjustable Hose Stop Included 
Specifications: 
- Inside Diameter 3/8 Inch / 9mm 
- Input & Output Fittings: 0.50 NPTF 
- Max Length 35 Foot / 10.5 Meters 
- Max Pressure 315 PSI / 2.17 N/mm2 
- Reel Size B 
- Available Options: at additional cost 
340 Degree Pivot Base Part GRD-PB19 
(40LBS) H 10" L 24" W 22" 
[Amazon]
0 $1,193.80
7 GRD-HG5025 Gleason Hose Reel 
Heavy Duty Hose Reel 
Series H for Machine Pull 
Part GRD-HG5025 
Features: 
- 1/2"/ 13mm Hose ID 
- All Welded Solid Steel Construction 
- Fully Automatic, Machine Mountable 
- Heavy Duty Mounting Bracket 
- Safetychange Spring Motor 
- Weatherproof Gasket on Spring Motor 
- Positive Ratchet Lock that can be disengage for constant tension 
- Multi-Position Adjustable Hose Guide 
- Orange Polyester Baked-on Finish 
- Adjustable Hose Stop Included 
Specifications: 
- Inside Diameter 1/2 Inch / 13mm 
- Input & Output Fittings: 0.50 NPTF 
- Max Length 25 Foot / 7.5 Meters 
- Max Pressure 315 PSI / 2.17 N/mm2 
- Reel Size B 
- Available Options: at additional cost 
340 Degree Pivot Base Part GRD-PB19 
(40LBS) H 10" L 24" W 22" 
[Amazon]
0 $1,156.38
8 GRD-HG5035 Gleason Hose Reel 
Heavy Duty Hose Reel 
Series H for Machine Pull 
Part GRD-HG5035 
Features: 
- 1/2"/ 13mm Hose ID 
- All Welded Solid Steel Construction 
- Fully Automatic, Machine Mountable 
- Heavy Duty Mounting Bracket 
- Safetychange Spring Motor 
- Weatherproof Gasket on Spring Motor 
- Positive Ratchet Lock that can be disengage for constant tension 
- Multi-Position Adjustable Hose Guide 
- Orange Polyester Baked-on Finish 
- Adjustable Hose Stop Included 
Specifications: 
- Inside Diameter 1/2 Inch / 13mm 
- Input & Output Fittings: 0.50 NPTF 
- Max Length 35 Foot / 10.5 Meters 
- Max Pressure 315 PSI / 2.17 N/mm2 
- Reel Size B 
- Available Options: at additional cost 
340 Degree Pivot Base Part GRD-PB19 
(45LBS) H 10" L 24" W 22" 
[Amazon]
0 $1,193.01
9 GRD-HG5050 Gleason Hose Reel 
Heavy Duty Hose Reel 
Series H for Machine Pull 
Model GRD-HG5050 
Features: 
- 1/2"/ 13mm Hose ID 
- All Welded Solid Steel Construction 
- Fully Automatic, Machine Mountable 
- Heavy Duty Mounting Bracket 
- Safetychange Spring Motor 
- Weatherproof Gasket on Spring Motor 
- Positive Ratchet Lock that can be disengage for constant tension 
- Multi-Position Adjustable Hose Guide 
- Orange Polyester Baked-on Finish 
- Adjustable Hose Stop Included 
Specifications: 
- Inside Diameter 1/2 Inch / 13mm 
- Input & Output Fittings: 0.50 NPTF 
- Max Length 50 Foot / 15.0 Meters 
- Max Pressure 315 PSI / 2.17 N/mm2 
- Reel Size B 
- Available Options: at additional cost 
340 Degree Pivot Base Part GRD-PB19 
aka GR604009 
[Amazon] 
(50LBS) H 10" L 24" W 22" Box
0 $1,247.95
Gleason Series GH Industrial Duty Hose Reels
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 GRD-GHA2525-L Gleason Model GHA2525-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHA2525-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 1/4 inch; 
- Length: 25 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 25' of low pressure 1/4" ID Hose 
- Input hose fitting: 1/4 NPTF; 
- O.D.: 0.51 inch; 
- Weight: 23 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(23LBS) H 13" L 13" W 6" 
[Amazon]
0 $229.32
2 GRD-GHA2535-L Gleason Model GHA2535-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHA2535-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 1/4 inch; 
- Length: 30 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 35' of low pressure 1/4" ID Hose 
- Input hose fitting: 1/4 NPTF; 
- O.D.: 0.51 inch; 
- Weight: 24 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(24LBS) H 13" L 13" W 6" 
[Amazon]
0 $234.78
3 GRD-GHB2550-L Gleason Model GHB2550-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHB2550-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 1/4 inch; 
- Length: 50 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 50' of low pressure 1/4" ID Hose 
- Input hose fitting: 1/4 NPTF; 
- O.D.: 0.51 inch; 
- Weight: 26 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(26LBS) H 15" L 15" W 7" 
[Amazon]
0 $278.46
4 GRD-GHA3825-L Gleason Model GHA3825-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHA3825-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 3/8 inch; 
- Length: 25 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 25' of low pressure 3/8" ID Hose 
- Input hose fitting: 3/8 NPTF; 
- O.D.: 0.65 inch; 
- Weight: 23 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(23LBS) H 13" L 13" W 6" 
[Amazon]
0 $245.70
5 GRD-GHB3835-L Gleason Model GHB3835-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHB3835-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 3/8 inch; 
- Length: 35 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 35' of low pressure 3/8" ID Hose 
- Input hose fitting: 3/8 NPTF; 
- O.D.: 0.65 inch; 
- Weight: 25 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(25LBS) H 15" L 15" W 7" 
[Amazon]
0 $278.46
6 GRD-GHC3850-L Gleason Model GHC3850-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHC3850-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 3/8 inch; 
- Length: 50 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 50' of low pressure 3/8" ID Hose 
- Input hose fitting: 3/8 NPTF; 
- O.D.: 0.65 inch; 
- Weight: 36 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(36LBS) H 18" L 18" W 7" 
[Amazon]
0 $343.98
7 GRD-GHE3870-L Gleason Model GHE3870-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHE3870-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 3/8 inch; 
- Length: 70 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 70' of low pressure 3/8" ID Hose 
- Input hose fitting: 3/8 NPTF; 
- O.D.: 0.65 inch; 
- Weight: 50 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(50LBS) H 21" L 21" W 7" 
[Amazon]
0 $475.02
8 GRD-GHB5025-L Gleason Model GHB5025-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHB5025-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 1/2 inch; 
- Length: 25 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 25' of low pressure 1/2" ID Hose 
- Input hose fitting: 3/8 NPTF; 
- O.D.: 0.77 inch; 
- Weight: 30 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(30LBS) H 15" L 15" W 7" 
[Amazon]
0 $316.68
9 GRD-GHC5035-L Gleason Model GHC5035-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHC5035-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 1/2 inch; 
- Length: 35 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 35' of low pressure 1/2" ID Hose 
- Input hose fitting: 3/8 NPTF; 
- O.D.: 0.77 inch; 
- Weight: 38 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(38LBS) H 18" L 18" W 7" 
[Amazon]
0 $398.58
10 GRD-GHC5050-L Gleason Model GHC5050-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHC5050-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 1/2 inch; 
- Length: 50 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 50' of low pressure 1/2" ID Hose 
- Input hose fitting: 3/8 NPTF; 
- O.D.: 0.77 inch; 
- Weight: 40 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(40LBS) H 18" L 18" W 7" 
[Amazon]
0 $414.96
11 GRD-GHE5050-L Gleason Model GHE5050-L Series GH Hose Reel for Commercial/Industrial Applications, P/N: GRD-GHE5050-L 
Features: 
- 1/4", 3/8", 1/2" or 3/4" hose hose; 
- Spring rewind; 
- Ratchet lock; 
- Multi-position four roller hose guide; 
- Adjustable hose stop; 
- Rugged steel construction; 
- Steel components protected by durable baked polyester finish; 
Specifications: 
- I.D.: 1/2 inch; 
- Length: 50 feet; 
- Max pressure: 300 psi; 
- Application: Air/Water; 
- 50' of low pressure 1/2" ID Hose 
- Input hose fitting: 1/2 NPTF; 
- O.D.: 0.85 inch; 
- Weight: 44 lbs; 
- Optional 340 degree pivot base, P/N RC-PB-B; 
- Optional wall mount 180 degree Pivot Base, P/N RC-WP; 
Product available at Amazon.com and BrakeProducts.com 
(44LBS) H 21" L 21" W 7" 
[Amazon]
0 $578.76
12 GRD-GHE7525-L Gleason Series GH Hose Reel 
For Commercial / Industrial Applications 
Model GRD-GHE7525-L 
Features: 
- 3/4 Inch ID Hose 
- Spring Rewind 
- Ratchet Lock 
- Multi-Position Four Roller Hose Guide 
- Adjustable Hose Stop 
- Rugged steel construction; 
- Steel Components protected by durable Baked Polyester Finish 
Specifications: 
- Length 25 Feet 
- Max Pressure 300 PSI 
- Application Air / Water 
- 25 Feet of Low Pressure 3/4 Inch ID Hose 
- Input hose fitting 3/4 Inch NPTF 
- O.D. 0.81 to 0.90 Inch 
- Weight 50 LBS 
- Optional 340 Degree Pivot Base Part RC-PB-B 
- Optional Wall Mount 180 Degree Pivot Base Part RC-WP 
aka GR60430304 
Product available at Amazon.com and BrakeProducts.com 
[Amazon] 
(50LBS) H 21" L 21" W 7" Box
2 $562.38
Gleason Series HH Handcrank Hose Reel, General Purpose Industrial Use
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 GRD-HH50100L Gleason Model HH50100L Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH50100L 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 1/2 inch; 
- Hose O.D.: 27/32 inch; 
- Max pressure: 300 psi; 
- Length: 100 feet; 
- Weight: 42 lbs; 
- Application: Air, water, oil or grease duty 
(42LBS) H 22" L 19" W 22"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $270.00
2 GRD-HH50200L Gleason Model HH50200L Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH50200L 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 1/2 inch; 
- Hose O.D.: 27/32 inch; 
- Max pressure: 300 psi; 
- Length: 200 feet; 
- Weight: 49 lbs; 
- Application: Air, water, oil or grease duty 
(49LBS) H 22" L 19" W 27"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $290.00
3 GRD-HH50300L Gleason Model HH50300L Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH50300L 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 1/2 inch; 
- Hose O.D.: 27/32 inch; 
- Max pressure: 300 psi; 
- Length: 300 feet; 
- Weight: 52 lbs; 
- Application: Air, water, oil or grease duty 
(52LBS) H 22" L 19" W 32"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $310.00
4 GRD-HH50400L Gleason Model HH50400L Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH50400L 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 1/2 inch; 
- Hose O.D.: 27/32 inch; 
- Max pressure: 300 psi; 
- Length: 400 feet; 
- Weight: 65 lbs; 
- Application: Air, water, oil or grease duty 
(65LBS) H 22" L 19" W 37"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $330.00
5 GRD-HH50100M Gleason Model HH50100M Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH50100M 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 1/2 inch; 
- Hose O.D.: 27/32 inch; 
- Max pressure: 2000 psi; 
- Length: 100 feet; 
- Weight: 43 lbs; 
- Application: Air, water, oil or grease duty 
(43LBS) H 22" L 19" W 21"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $300.00
6 GRD-HH50200M Gleason Model HH50200M Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH50200M 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 1/2 inch; 
- Hose O.D.: 27/32 inch; 
- Max pressure: 2000 psi; 
- Length: 200 feet; 
- Weight: 49 lbs; 
- Application: Air, water, oil or grease duty 
(49LBS) H 22" L 19" W 27"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $320.00
7 GRD-HH7550L Gleason Model HH7550L Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH7550L 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 3/4 inch; 
- Hose O.D.: 1-3/16 inch; 
- Max pressure: 250 psi; 
- Length: 50 feet; 
- Weight: 43 lbs; 
- Application: Air, water, oil or grease duty 
(43LBS) H 22" L 19" W 21"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $315.00
8 GRD-HH75100L Gleason Model HH75100L Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH75100L 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 3/4 inch; 
- Hose O.D.: 1-3/16 inch; 
- Max pressure: 250 psi; 
- Length: 100 feet; 
- Weight: 50 lbs; 
- Application: Air, water, oil or grease duty 
(50LBS) H 22" L 19" W 27"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $325.00
9 GRD-HH75100M Gleason Model HH75100M Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH75100M 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 3/4 inch; 
- Hose O.D.: 1-3/16 inch; 
- Max pressure: 2000 psi; 
- Length: 100 feet; 
- Weight: 53 lbs; 
- Application: Air, water, oil or grease duty 
(53LBS) H 22" L 19" W 27"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $355.00
10 GRD-HH100100L Gleason Model HH100100L Series HH Hose Reel, General Purpose Industrial Use, P/N: GRD-HH100100L 
Features: 
- Manual pull off, handcrank rewind; 
- 1/2", 3/4" or 1" hose; 
- EPR seals in the swivel joint; 
- Pressure rating is that of the swivel joint and not that of the hose; 
- Full flow shaft and swivel assure maximum product delivery; 
- Hose is NOT included with reel, must be purchased separately to match reel for a specific application; 
- The input fitting on the swivel joint is the same size as the output fitting on the reel spool; 
- High quality swivel joints designed with seals for each specific fluid application; 
- Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; 
- Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off; 
- Rugged steel construction; 
- Heavy duty mounting brackets; 
- Orange polyester baked-on finish; 
Specifications: 
- Hose I.D.: 1 inch; 
- Hose O.D.: 1-3/8 inch; 
- Max pressure: 200 psi; 
- Length: 100 feet; 
- Weight: 58 lbs; 
- Application: Air, water, oil or grease duty 
(58LBS) H 22" L 19" W 33"  
Product available at Amazon.com and BrakeProducts.com 
[Amazon]
0 $355.00
Gleason Hose Reels
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 GRD-J010160992-A- Gleason Hydraulic Hose Assembly - 0 $16.00
2 GRD-J100A-24-18932 Gleason Hose Reel model J100A-24-18932 - 0 $2,240.00
3 GRD-J35A-12-104521-9 Gleason Hose Reel model J35A-12-104521-9. Heavy Duty Hose Reel to LIFT up to 20 Feet of 0.75 Inch I.D. Air Hose Rated @ 300 PSI. Hose is not included. 0.75 Inch NPT Entrance and Exits. Safety Change External Spring Motor. Orange, Epoxy Powder Coated & Baked Corrosion resistant finish. Options available at additional cost include; Installed Air Hose, Pivot Base GL-20-07, Riser Base GL-26-03, 4-Roller Guide GL15-23, Ball Stop G101-04, Ratchet Lock 00701701 or Spool Lock 032182 (100LBS) 00040006 (178LBS) - 0 $1,766.00
4 GRD-J75A-12-10452 Gleason hose reel including 032182 J-series spool lock, 012089 Roller guide assy S28 down,101540 male hose barb 3/4 ACC 102-1212, 101481 clamp - hose 16 hs .81- 1.5 wittek, 35 ft 81203002 .750"x1.190" 315 psi hose all installed at the factory. - 0 $1,202.13
5 GRD-J80A-12-124528 Gleason Hose Reel. Heavy Duty Industrial Hose Reel Series "J" model J80A-12-124528 
80 = 80 Series Main Spring 
12 = 12/16 or 3/4 Inch I.D. Hose Swivel 
12 - Inner Drum Diameter to protect the hose 
45 - 4.5 Inch Useable. Inner Drum Width 
28 = 28 Inch Drum / Disc Diameter 
X - Pretension Turns required at installation 
300 P.S.I. Standard 
Available options include: Installed Hose with Fittings, a Riser Base as the spool is larger than the frame, 4-Roller Guide & Muti-Postion Guide Arm, 340 Degree Pivot Base, Ratchet Lock & a Ball Stopp  
(140LBS)
- 0 $2,280.00
6 GRD-J80A-12-12728 Gleason Hose Reel. Heavy Duty Industrial Hose Reel Series "J" model J80A-12-12728 to RETRIEVE 100 Feet of 0.75 I.D. Hose 
80 = 80 Series Main Spring 
12 = 12/16 or 3/4 Inch I.D. Hose Swivel 
12 - Inner Drum Diameter to protect the hose 
72 - 7.2 Inch Useable. Inner Drum Width 
28 = 28 Inch Drum / Disc Diameter 
X - Pretension Turns required at installation 
300 P.S.I. Standard 
Available options include: Installed Hose with Fittings, a Riser Base as the spool is larger than the frame, 4-Roller Guide & Muti-Postion Guide Arm, 340 Degree Pivot Base, Ratchet Lock & a Ball Stop  
(140LBS) 00040307
- 0 $2,284.00
7 GRD-J80A-16-12728-7 Gleason Hose Reel model 80A-16-12728-7 to RETRIEVE up to 70 feet of 1 Inch I.D. Air Hose. 300 PSI. Hose is not included. Opinions available at additional cost include. Installed air hose, pivot base, riser base, 4-roller guide, ball stop, ratchet lock or a spool lock. 300 PSI 00040309 - 0 $2,284.00
8 GRD-J80A-X-123518 Gleason Reel Special J80 Reel to LIFT 40 FT of .5 Inch O.D. Nylon Rope. Same as serial # G85496-86 with Special Marine Duty Paint Option, 4 -Roller Guide GL15-23, Ratchet Lock 00701701 & Spool Locking Assembly 032182. Standard Clockwise Rotation GR054522 - 0 $2,531.00
9 GRD-J80A-X-123518-R Gleason Reel Special J80 Reel to LIFT 40 FT of .5 Inch O.D. Nylon Rope. Same as Serial # G86548-86 with Special Marine Duty Paint Option, 4 -Roller Guide GL15-23, Ratchet Lock 00701701 & Spool Locking Assembly 032182. Reverse / Counter Clock Wise Rotation GR054521 - 0 $2,681.00
Gleason Hose Reel Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 GRD-C0 Gleason Ball Stop 
Neoprene Ball Stop for Cable & Hose Master Reels 
Handles Diameters from 0.25 to 0.44 Inches 
(1LB) [4/2017]
- 0 $24.25
2 GRD-C1 Gleason Ball Stop 
Neoprene Ball Stop for Cable & Hose Master Reels 
Handles Diameters from 0.47 to 0.56 Inches 
(1LB) [4/2017]
- 3 $24.25
3 GRD-PB14 Gleason Pivot Base. 340 Degree Pivot Base 602067 (12LBS) 
(12LBS) H 4" L 6" W 8" 
[Amazon]
0 $131.30
4 GRD-PB19 Gleason Pivot Base. 340 Degree Pivot Base 602069 (23LBS) 
(23LBS) H 6" L 8" W 10" 
[Amazon]
0 $396.47
5 GRD-RC-PB-B Gleason Pivot Base  
340 Degree Pivot Base 
Part GRD-RC-PB-B 
For GHE Reels 
aka GR60254303 
[Amazon] 
(10LBS) H 5" L 5" W 5" Box
0 $100.52
6 GRD-RC-WP Base fits all reel sizes 
(2LBS) H 5" L 5" W 5" 
[Amazon]
0 $124.27
Secure Online Order
 

 
Secure Online Order
 
23,193 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Click to visit our Amazon store
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate
 
Frequently Sold
Replacement Parts
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gleason part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Engineered Products

 
Gleason
Engineered Products

 
  • Cable Reels:
    • Cable-Master Reels
    • Series "S" & "WB" Reels
    • Series "MMD" & "SM" Reels
    • Series "SHO" & "TMR" Reels
    • Welding Cable Reels
    • Low Profile Level Wind Reels
    • Vari-Matic Drive Reels
    • Motor-Driven Pendant Station
      Reels
    • Emergency Vehicle Reels
    • Series "SZ" Reels
    • Main Spring Assemblies
    • Cable Reel Roller Guides
    • Heavy Duty Reeling Systems
  • Festoon Systems:
    • Series Track Master
    • Series Beam Master
    • Series I-132
    • Series PDQ 300 I-Beam
    • Series PDQ 450 & 700 I-Beam
    • Series RTG 450 & 700 I-Beam
    • Series T-50 Curved Rail
  • Hose Reels:
    • Hose Reels
  • PowerTrak Drag Chains:
    • PowerFlex
    • PowerTube
    • Type "GRP" Molded Nylon
    • Type "E" & "EF" Steel Link
    • Type "G" Nylon & Aluminum
  • Conductor Bar, Electrification:
    • Conductor Bar, Electrification
  • Slip Ring Assemblies:
    • Compact & Rota-Power
    • Compact 30 Amp & 55 Amp
    • Compact 30 Amp (DR)
    • Rota-Power 35 Amp
    • Rota-Power 75 Amp
    • Rota-Power 125 Amp
    • Rota-Power 200 Amp
Pre-Engineered Products

 
Gleason
Pre-Engineered Products

 
  • Cable Reels:
    • "ER" Hoist Reels
    • "G" Heavy Duty Cable Reels
  • Cord Reels:
    • Compact Cord Reels
    • Industrial Duty Cord Reels
    • Outlets, Lamps & Receptacles
  • Festoon Kits & Components:
    • Wire Rope, Nylon, Cable/Hose
    • Wire Rope, Nylon, Flat Cables
    • Wire Rope, Steel, Flat Cables
    • Optional Components
    • C-Rail C25, Components
    • C-Rail C35, Flat Cable
    • C-Rail C35, Round Cable
    • C-Rail C35, Components
    • T-Track Heavy Duty
    • Kellems Cord Grips
    • Kellems Support Grips
    • NEMA 12 Electrical Boxes
    • Cable Connectors
    • Universal Cable Grips
    • Festoon Cable
    • Adjustable Beam Trolleys
    • Festoon Pendants
  • Hose Reels:
    • "GHA" Industrial Duty Reels
    • "EZ" Pull Heavy Duty Reels
    • "HC" Heavy Duty Reels
    • "EZ9" Clean Air Reels
    • "HH" Hand Crank Reels
    • "UH" Universal Reels
  • PowerTrak Kits:
    • PowerTrak Kits
  • Limit Switches, Geared Rotary:
    • 54 Series
    • 55 Series, NEMA 4
    • 55 Series, NEMA 7
  • Static Discharge Products:
    • Cable & Accessories
    • Static Discharge Reels
  • Tool Balancer Reels:
    • Accessories
    • Tool Balancer Reels
 
Workplace Solutions

 
Hubbell
Workplace Solutions

 
  • Booms and Jibs
  • Mobile Carts
  • Qualtech Computer Enclosures
  • Qualtech Document Stands
  • Tool Balancers
  • Workstations
  • Complete List & Catalog
  • Hubbell WS Idea Sheets
PowerTrak Replacement Parts

 
Gleason
PowerTrak Replacement Parts

 
  • PowerTrak Replacement Parts
Reels Replacement Parts

 
Gleason
Reels Replacement Parts

 
  • Reels Replacement Parts
Manuals and Information

 
Gleason
Manuals and Information

 
  • Manuals and Information
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985