Gleason Industrial Hose Reels
 |
|
Hose Reels with 1/4" to 1/2" I.D. PVC hose. Ideal mounted under workbench. May also be hung from wall or
ceiling. Full flow shaft and swivel assure maximum product flow. Reels feature spring rewind with ratchet lock and
multiple position hose guide. Rugged steel construction with durable baked polyester finish. Adjustable hose stop
included.
Gleason Industrial Hose Reels Information
|
Gleason E-Z Pull Single Hose Reels
 |
|
E-Z PULL HOSE REELS are designed to make hose handling safer and smoother and to minimize costly hose replacement
caused by excessive rewind speeds. Rewind pull is kept to a minimum. The result is a reel that is gentle to pull
out, yet very adequate to rewind the hose. In some situations, the rewind pull provided by E-Z PULL reels may
require a gentle assist from the operator.
The E-Z PULL reel was designed to drag the hose across the floor, but will not lift the hose weight vertically.
Therefore, the reel should be mounted a maximum of 3 ft (0.9m) above the floor so that the hose may be pulled
horizontally. Reel may be mounted with base up, down, or on a wall. A typical mounting is under a workbench or
other floor mounted equipment. This reel is not designed to be mounted on a machine requiring automatic hose rewind.
Gleason E-Z Pull Single Hose Reels Information
|
Gleason Series HH Hose Reels
 |
|
Choose reels designed for 1/2", 3/4" or 1" hose. Standard reels are supplied with EPR seals in the swivel
joint, specify application when ordering if standard EPR is not acceptable. Hose is not included with reel, therefore
the hose must be purchased separately and matched to reel for your specific application. Full flow shaft and swivel
assure maximum product delivery. Input fitting on the swivel joint is the same size as the output fitting on the reel spool.
Gleason Series HH Hose Reels Information
|
|
Gleason Heavy Duty Single Hose Reels
 |
|
Ideal for connecting machines to air/water supply. Also designed for hand pull operations, with or without ratchet stop.
Features:
• 1/4", 3/8", or 1/2" (6, 9, 13mm) hose
• All welded solid steel construction
• Fully automatic; Machine mountable
• Heavy duty mounting bracket
• Safetychange® spring motor
• Weatherproof gasket on spring motor
• Positive ratchet lock with disengage
• Multi-position adjustable hose guide
• Orange polyester baked-on finish
• Also available without hose
• Optional 340 degree pivot base
• Optional adjustable hose stop
• Ideal for fluids, compressed air
• Mount base up, down or to wall for
vertical or horizontal hose travel.
Gleason Heavy Duty Single Hose Reels Information
|
Gleason Clean Air Hose Reels
 |
|
E-Z PULL CLEAN AIR HOSE REELS are engineered to safely and efficiently store the hose from an air line respirator.
Gone are loose coils that cause tangled hoses which can lead to dangerous kinks in the air line. User is in complete
control. Soft rewind pull means that even if ratchet stop should accidentally be released, hose will not snap back.
Reel designed for 50 ft.(15m) x 7/8"(22mm) O.D. Neoprene hose supplied by others (GSA part number 455022 or
equivalent). All air path parts are stainless steel.
Gleason Clean Air Hose Reels Information
|
Gleason Series UH Hose Reels
 |
|
The Gleason U-Reel provides ultimate flexibility... larger diameter and/or wider spools, single or dual spring motors, chain
drive where needed. In addition, the modular U-Reel design allows us to provide a custom reel for your application at the
cost of an off-the-shelf unit. Sizing tables in this catalog enable you to choose your reel from a selection of commonly used
sizes. Or, send us your requirements and let the sophisticated Gleason computerized program determine the spool size, spring
configuration and drive that will give you the most rugged, smoothest operating and longest lasting reel money can buy. The
rugged U-Reel, featuring a heavy frame with spool supported on dual over-sized bearings, can easily handle air, water or hydraulic
hoses up to 1.5" I.D. U-Reel is rated at 300 psi per standard hose and hose fittings but high pressure applications to 10,000
p.s.i. are possible with proper hardware. Options include an adjustable roller hose guide, spool lock, ratchet lock, 340o
pivot base, dual hose and stainless steel fluid path.
Gleason Series UH Hose Reels Information
|
|
