Gleason Cable-Master Reels
 |
|
Gleason Cable-Master Reels give you more for your money because they are ruggedly built and their design has
been refined over many years of field use. The have either fully automatic or ratchet controlled spring rewind
and contain all the features found in any reel in this size range. Standard features include: rollered cable
guide, ratchet lock and 600 volt slip ring. Available for 3 to 12 conductors, 20' to 70' long cables.
Gleason Cable-Master Reels Information
|
Gleason Emergency Vehicle Cable and Hose Management
 |
|
When seconds count, rely on Gleason Cable-Master Reels. When the call comes in, emergency vehicles must be ready
to roll, get to the scene and spring into action. Cable-Master reels mounted overhead at station provide
"off-duty" power to vehicles. Hose-Master reels keep air brakes charged. Both can be equipped with
sockets which automatically disconnect when the engine starts. Truck mounted reels provide quick cable deployment
at the scene and can hold up to 90' of cable.
Gleason Emergency Vehicle Cable and Hose Management Information
|
Gleason Low Profile Level Wind Reels
 |
|
Direct replacement for existing low profile reels with up to 100' of cable. Ideal for magnet and hook/rotate crane
applications. Feature easily adjusted, externally mounted springs... no need to remove cable from spool or disassemble
reel to adjust or replace drive springs. Available with 35, 75, 125 or 200 amp collector.
Gleason Low Profile Level Wind Reels Information
|
Gleason Motor-Driven Pendant Station Reels
 |
|
Automatically raise and lower push-button stations for floor controlled cranes and hoists. Wind and store up to 120'
of cable. Average retrieval speed - 135 fpm (40.5 mpm). Reversible 1800 RPM, 230-460 VAC drive motor. Electro-magnetic
brake holds cable in place when motor is de-energized. Capacities from 2-36 conductor cables, No. 16 through No. 10 AWG
wire size.
Gleason Motor-Driven Pendant Station Reels Information
|
Gleason Series "MMD" Heavy Duty Electric Cable Reels
 |
|
Built tough to provide dependable Mill Duty service under adverse conditions. Specially designed to operate reliably
and safely, MMD reels feature "beefed-up" all steel construction, oversized bearings on both sides of the
load bearing spool, and a heavy duty shaft. Four spool diameters, a wide variety of drum diameters and either direct
or geared drive allow maximum flexibility in specifying the right reel for your application. Models for 2 to 36
conductors, cable length from 30' to 200'. May also be used for crane magnet applications.
Gleason Series "MMD" Heavy Duty Electric Cable Reels Information
|
Gleason Series "S" Spring-Driven Electric Cable Reels
 |
|
Gleason Series "S" Spring-Driven Electric Cable Reels are designed to be mounted on moving machinery.
Electric current flows from your power source to the current consumer through the cable you specify. S-Reels
utilize self-contained slip ring assemblies which transfer current to the cable mounted on the rotating spool.
Models for 2 to 36 conductors, 30' to 120' for lift, drag and stretch applications (200' for retrieve applications)
Gleason Series "S" Spring-Driven Electric Cable Reels Information
|
Gleason Series "SHO" & "TMR" Retrieve Type Electrical Cable Reels
 |
|
SHO/TMR Series Reels are designed to provide a low cost solution for long electrical cable horizontal retrieve
applications. A horizontal retrieve application is when the reel is mounted on the moving equipment and winds
or pays-out cable into a tray or other support. In the SHO series reels, winding torque is provided by one or
more parallel design spring motors. The TMR Series Reels utilize a small toque motor/gear reducer to drive the
spool. Both SHO and TMR Series Reels are available with either random wrap or monospiral wrap spools. Gleason
SHO/TMR reels have retrieve capacities of 350 feet of electric cable at a velocity of 150 ft./min and acceleration
of 1.0ft./sec/sec.
Gleason Series "SHO" & "TMR" Retrieve Type Electrical Cable Reels Information
|
|
Gleason Series "SM" Extra-Heavy Duty Electric Cable Reels
 |
|
Series "SM" reels are specially designed for steel mill and magnet service. The heavy 3/8" steel
plate L-shaped frame and 1/4" thick steel spool disks provide added strength. Oversized regreasable bearings
on both sides of the load-bearing spool are standard. All models are gear drive. The heavy-duty collector assembly,
rated at 35, 75, 125 or 200 amps, 600 VAC or 550 VDC features polished copper rings for maximum dependability. Models
for 2 to 36 conductors, cable from 30' to 200' depending on application. Also used on crane magnets.
Gleason Series "SM" Extra-Heavy Duty Electric Cable Reels Information
|
Gleason Series "SZ" Hazardous Duty Reels
 |
|
"SZ" Hazardous Duty Cable Reels have all the features of an "S" Reel plus an extra heavy
slip ring enclosure and pre-wired/pre-potted junction box. Designed for use in Class I (groups C & D) and Class
II (groups E, F & G, division 1 & 2) hazardous environments, the direct or gear spring drive reels are available
with 16" to 32" diameter spools. The pre-wired and pre-potted NEMA 7-9 junction box saves time during
installation because the electrical connections are made in the box, not directly on the slip ring. Slip rings
are available for four to 36 circuits, 35 to 200 amp.
Gleason Series "SZ" Hazardous Duty Reels Information
|
Gleason Series "WB" Cable Reels without Slip Rings
 |
|
Series "WB" Cable Reels are continuous contact reels designed for applications such as communication
where any impedance must be avoided. Because WB-Reels use one continuous length of cable, there is no break from
current source to consumer and that means complete preservation of transmission integrity. This transmission
integrity makes WB reels ideal for use with fiber optic cable. Models available for 30' to 120' of cable.
Gleason Series "WB" Cable Reels without Slip Rings Information
|
Gleason Vari-Matic Drive Reels
 |
|
The Gleason VARI-MATIC drive provides a reliable solution to the challenge of retrieving and unwinding long lengths
of valuable cable at the demanding cycle rates of today's advanced machinery. Vari-Matic Reels are available with
level-wind or monospiral spools.
Level Wind reels provide best management of long cables and have demonstrated through years of use to be the safest
and most reliable way to handle long lengths of large cable. By winding a single layer of cable horizontally on a
generous drum diameter, the cable experiences minimum flexing and is exposed to maximum cooling, should that be a
concern. Equipment speeds can be slow, moderate or high with equally good performance.
Monospiral reels provide best low reel mounting and are designed to stack cable in a single, multiple layer vertical
configuration. They are the solution to applications involving large cables where lateral space may be limited. This
narrow spool design, together with proven VARI-MATIC drive reliability, makes monospiral reels ideal for service in
any demanding environment. Monospiral reels are available for low, medium or high speed requirements. The monospiral
design allows the reel itself to act as a cable guide.
Gleason Vari-Matic Drive Reels Information
|
Gleason Welding Cable Reels
 |
|
Gleason welding reels store up to 85' of arc welding cable. No more time wasting hand coiling, or hazardous tangled
and jumbled piles of cable. Cable easily unreels...ratchet lock keeps it extended when in use. To rewind, just tug
the cable to release the ratchet (like a window shade) and walk the rod holder or clamp back to the reel. Custom
designed machined brass collector provides positive circuit through reel to cable. Lead from welder to reel is
easily installed and held securely in place. Reels are available with or without cable.
Gleason Welding Cable Reels Information
|
|
